Prizmatix - LED Products Comparison2



	\| HOME \| PRODUCTS \| COMPANY \| TECHNICAL DOCS \| CONTACT US \|

Prizmatix LED Products Comparison

	Black-LED	Silver-LED	Slim-LED
LED Housing
Price	****	***	**
Fiber Coupled Power	****	***	**
Optical output connector types	SMA, FC, ST	SMA	SMA
Coupling technology	Aspheric Lenses	Direct coupling	Direct coupling
Heat dissipation	Passive heat clearance	Passive heat clearance	Passive heat clearance
Fiber optic patch cord	If needed sold separately	If needed sold separately	If needed sold separately
Bandpass limiting interference filter between the LED and fiber connector	Optional	Not applicable	Not applicable
Dimensions [mm] (W x H x L)	50 x 50 x 45 LED Head Housings	105 x 55 x 165	80 x 30 x 125
Current Controller
Suitable Current Controller	BLCC-2 Included in separate box	Included in LED housing	Included in LED housing
Dimensions [mm] (W x H x L)	75 x 40 x 120	105 x 55 x 165	80 x 30 x 125 mm
CW Operation	Yes	Yes	Yes
External TTL input	Yes	Yes	No
External Analog modulation input	Optional	Optional	No
Output power control	10 Turns precision Potentiometer with numerical dial	10 Turns precision Potentiometer with numerical dial	Simple Potentiometers
Power input	24 VDC, 1A	24 VDC, 1A	24 VDC, 1A
Power Adaptor
Power input	100-240 VAC, 1 A, 47- 63 Hz	100-240 VAC, 1 A, 47- 63 Hz	100-240 VAC, 1 A, 47- 63 Hz
Power output	24 VDC, 1.1Amax 25Wmax	24 VDC, 1.1Amax 25Wmax	24 VDC, 1.1Amax 25Wmax
Safety	TUV, UL	TUV, UL	TUV, UL

Remark:
For full information please see LED Products Comparison Table in PDF format

Optional Accessories

Fiber patch cords:
Various fiber optic patch cords are available for use with the 3-LED or 5-LED products. Most popular patch cords are 1000 / 1500 / 2000 micron core diameter Polymer Optical Fibers (POF) terminated by optical SMA connectors on both sides. Prizmatix can provide Stainless Steel tube at one end of the patch cord instead of the SMA connector. This configuration is more convenient in some applications. See more info...

Collimator:
The output from optical fiber is divergent according to fiber NA. In order to reduce the divergence angle a collimator module can be used. Prizmatix collimator was especially designed to fit thick core high NA Polymer Optical Fibers. See more info...

Fiber Bundles:
To combine outputs of multiple LEDs a Y-shaped fiber bundle with two or more input branches can be used. Prizmatix can help to configure and build custom fiber bundles for specific applications. See more info...

Special Bundles:
For spectroscopy application special fiber optic bundles are very important. Special care must be addressed to eliminate possible cross link between the excitation and the collection fibers. See more info...

Used-line.com.