UHP-Microscope-LED-White Ultra High Power LED Light Source for Fluorescence Microscopy
Introduction
The Ultra High Power LED provides almost x10 increase of power in comparison with similar High Power LED devices. The Ultra High Power White LED (29 Watt) is an effective replacement of Mercury and Xenon lamps in many power demanding applications, such as fluorescence microscopy and machine vision.
This new member of the modular OptiBlocks family provides >2 Watt of collimated White LED power on its output. The LED driver supports CW or pulsed operation.
LED spectrum can be narrowed by optional band pass filter.
Stable precisely adjustable power
Long life (no lamp or laser tube replacement required)
Rapid warm up time
Applications
Fluorescence microscopy, e.g. for staining with CFP, Fura Red, GFP, Fluorescein, FITC, Mito Tracker, Alexa, Cy3, Texas Red.
Whole body imaging of small animals in-vivo
Bio analysis
Machine Vision
Optical Specifications
Wavelength
nm
See Spectrum
Collimated optical power output
mW
>2000
Benchtop LED Current Controller Specifications
Features
Constant current or chopping modes
Precise LED current setting by 10 turn dial
TTL external trigger input
Compact and robust enclosure
Digital modulation input
TTL
Connector for TTL input
BNC
Digital modulation frequency
Hz
DC-30000
Rise / Fall time (10% - 90%)
μs
2
ON/OFF extinction
>106 : 1
Input Voltage
V
12
Max Input current
A
5.5
Power Adaptor Input
100-240 VAC, 50-60Hz, 1.5A
General Specifications
Operation temperature range
°C
10-35
Storage temperature range
°C
-10-55
Operating relative humidity (Non
condensing)
%
<90
Head dimensions
See drawing below
Head weight
g
500
Controller dimensions (LxWxH)
220mm x 165mm x 51.5mm
Controller weight
g
700
Power adaptor dimensions
(LxWxH)
146mm x 76mm x 44mm
Power adaptor weight
g
600
Fan noise
dBA
38
Performance
UHP-Mic-LED-White spectrum
Optional Accessories
Fiber Coupler Adaptor:
The Microscope-LED can be easily changed from direct microscope coupling to fiber coupled LED configuration by means of Fiber Coupler Adaptor. This adaptor can be easily assembled by a user on the Mic-LED output. Please see video clip and contact us for more details.
Liquid Light Guide Adaptor:
The Microscope-LED can be easily changed from direct microscope coupling to Liquid Light Gide coupled LED configuration by means of LLGA Adaptor. This adaptor can be easily assembled by a user on the Mic-LED output. Please see video clip and contact us for more details.
Fiber patch cords:
Various fiber optic patch cords are available for use with the 3-LED or 5-LED products.
Most popular patch cords are 1000 / 1500 / 2000 micron core diameter Polymer Optical Fibers (POF)
terminated by optical SMA connectors on both sides. Prizmatix can provide Stainless Steel tube at one end of
the patch cord instead of the SMA connector. This configuration is more convenient in some applications.
See more info...
Collimator:
The output from optical fiber is divergent according to fiber NA. In order to reduce the
divergence angle a collimator module can be used. Prizmatix collimator was especially designed to fit thick
core high NA Polymer Optical Fibers.
See more info...
Fiber Bundles:
To combine outputs of multiple LEDs a Y-shaped fiber bundle with two or more input
branches can be used. Prizmatix can help to configure and build custom fiber bundles for specific applications.
See more info...
Special Bundles:
For spectroscopy application special fiber optic bundles are very important. Special care
must be addressed to eliminate possible cross link between the excitation and the collection fibers.
See more info...
UHP-Microscope-LED-405
