Home >
Products >
Ultra High Power LEDs >
UHP-F-LED
|
UHP-F-LED
|
USA/Canada: +1 (248) 436-8085
|
Ultra High Power light guide coupled LED light source
|
Introduction
Prizmatix UHP-F-LED series of Ultra High Power LED (up to 70Watt)
light guide coupled light sources was designed especially for microscopy and
OEM illumination applications in life science instrumentation, machine vision,
confocal microscopy and many others. The UHP-F-LED housing is self-contained
light source including all necessary driver electronics and thermal management,
no special controller box is required to operate the module if used at maximum power.
UHP-F-LED
UHP-F-LED-UV-Curing
|
Click picture to enlarge
|
|
Key features:
- Single chip Ultra High Brightness LED
- Simple integration for OEM
- Isolated TTL and Analog Input
- Fast TTL switching
- Low optical noise
- Remote control by I²C
- Optional Console for Power and ON/OFF control
- Long life (no lamp or laser tube replacement required)
|
Click picture to enlarge
|
|
Applications:
- Routine microscopy and cell culture microscopy
- Bio-instrumentation
- Curing of UV adhesives
- Machine vision
|
|
Optical Specifications:
Wavelength |
nm |
365nm, 460nm, 520nm, 625nm and White 4500K,5700K,6500K and High CRI* |
Optical power output from LLG-3** |
W |
1.0 |
Optical power output from LLG-5** |
W |
2.0 |
* Other wavelengths are available upon request
** Data is for White-High-CRI LED. LLG-3 and LLG-5 are Liquid Light Guide core diameter 3mm and 5 mm respectively
|
|
Electrical Specifications:
Digital modulation (TTL Input) |
Hz |
DC-30000 |
Analog modulation (Analog Input) |
Hz |
DC-100 |
Analog power control |
% |
0-100 |
ON/OFF |
|
Power switch or by TTL signal |
Input Voltage (Float) |
V |
12 |
Max Input current |
A |
6.5 |
|
|
General Specifications:
Operation temperature range |
0C |
10-35 |
Storage temperature range |
0C |
-10-55 |
Operative relative humidity (Non condensing) |
% |
<90 |
Dimensions |
|
See drawing below |
Head weight |
g |
750 |
|
|
Mechanical drawings
LLG Port is designed for a standard light guide:
End fittings diameter ∅5mm (for ∅3mm light guide core)
Tip length of 20mm.
LLG Port and mounting options may vary according to customer's specifications.
Specifications subject to changes without notice
|